Snap Lock Roofing Panel | K&M Sheet Metal

Snap Lock Roofing Panel 1.5" Submittal Drawing

Snap Lock Roofing Panel - 1" Submittal Drawing

Snap Lock Roofing Panel - Red Panels on a Home

Snap Lock Roofing Panel - Installation Example on Home

Snap Lock Roofing Panel

Product SKU :

$ 6.50

Material
Seam Height
Panel Length List

This combination does not exist.

Minimum Qty 100

ADD TO CART BUY NOW

Panel Length List: Panel Qty and Length

Terms and Conditions
30-day money-back guarantee
Lead Time: ~15.0 Days

Snap Lock Standing Seam Panels

Sold by the lineal foot with a minimum order of 100'. Use the panel length list box to specify the amount and length needed for each panel. The minimum panel length is 3' long and the maximum for shipping orders is 20' long. If you are picking up the panels at K&M the maximum length is 40' long.

Example:

10 @ 15' each
5 @ 8' each
25 @ 5' each

The most widely used, metal roof system, the snap lock, also commonly referred to as just standing seam roofing is one of the easiest metal roof systems to install. This profile panel is available in 1” or 1.5” high standing seam.

Copper based systems offer the advantage of being able to be soldered where needed, where aluminum systems are easier to work with and more malleable, while Kynar steel systems are a more tough panel, although not recommended for installations near the ocean.

These panels are secured to the roof deck via roof clips. Other Colors and tapered panels available by custom quote please contact us at [email protected] if you would like to place a custom order.

Why choose standing seam metal roofing over corrugated roofing panels?

The single main reason why you would choose a standing seam roof system is because it is a better system, and the main reason for this is because when properly installed, no fasteners are visible, nothing pierces through the panels to attach it to the roof deck. This is all done under the panel, which minimizes the chances for leaks. Corrugated roof systems are installed by fastening through the panel into the roof deck, meaning the panel is now pierced.

What's the best material for a metal roof?

Copper is widely used. It is a soft, malleable material that is easy to work. It can also be soldered, which is great for awkward flashing conditions / locations. This allows for a more leak proof system. Material such as zinc, lead coated copper and freedom gray share the same capabilities.
Aluminum is a soft material, easy to work with. It is available in colors and it is cheaper than copper for example. It also does not rust.
Galvanized steel kynar coated or Galvalume steel kynar coated are a more rigid material, not as easy to work with, but more rugged, capable fighting the elements a little better in some situations. This system eventually rusts, however, it should not before its expected lifetime, unless installed in environments not recommended, such as near the ocean.

Specifications

Snap Lock 1" Finished Coverage 17" (available in other sizes by request)
Snap Lock 1.5" Finished Coverage 16" (available in other sizes by request)
Concealed Fastener and Clip System.
Panel Lengths 3' - 20' if Shipping / 3' - 40' if picking up at K&M Sheet Metal

Submittals & Downloads

PDF - 1.5″ Snap Lock Metal Roof Panel Profile

PDF - 1″ Snap Lock Metal Roof Panel Profile

Color and Material Options

The most popular roof panel colors for Kynar Steel and Aluminum are Dark Bronze and Charcoal

Kynar® Aluminum & Galvalume Steel

Black

Matte Black
**24 Gauge Steel Only

Dark Bronze

Medium Bronze

Almond

Bone White

Copper Penny

Charcoal

Special Order Colors

Special Order colors require a minimum 2000 sqf. purchase for coil. Most colors have a 1 sheet minimum per order. Extra freight charges apply.

Patina Green

Teal

Hemlock Green

Forest Green

Hartford Green

Evergreen

Hunter Green

Arcadia Green

Military Blue

Berkshire Blue

Graphite

Interstate Blue

Slate Blue

Award Blue

Burnished Slate

Aged Bronze

Mansard Brown

Burgundy

Terra Cotta

Cardinal Red

Colonial Red

Midnight Bronze

Musket Gray

Sierra Tan

Sandstone

Slate Gray

Cityscape

Granite

Stone White

Anodic Clear

Silversmith

Silver

Champagne

Zinc

Weathered Zinc

Aged Copper

Weathered Steel

More Information

Kynar coated material is supplied by Petersen (Pac-Clad).
Colors are mostly available in 0.032″ and 0.040″ aluminum as well as 24 gauge galvalume (steel).
Some colors are available in 0.050″ and 0.063″ aluminum as well as 22 gauge galvalume.
Material available in sheet or coil format.
Pac Clad Sheets measure 48″ x 120″. No minimum purchase, but fees apply.
Standard coil widths are 20″ and 24″. Coils can be cut to any custom with from 48″ and under. Fees apply. 2000 sqf minimum purchase.
To learn more about Kynar® PVDF coated materials, please click here.

Downloads / Color Charts

PDF – PAC CLAD – Kynar Aluminum and Galvalume Steel Color Chart

Color Chart – To obtain a physical color chart or color chips, please visit this link.

Unpainted Stocked Materials

Bonderized Steel

Copper

Freedom Gray

Galvalume Plus

Galvanized Steel

Lead Coated Copper

Mill Finish Aluminum

Stainless Steel

More Information

Bonderized Steel: Also known as Paint Grip. Offered in 26 gauge G90. 24 gauge available as special order.

Copper is commonly stocked in 3′ x 10′ and 4’x10′ sheets, 11.75″, 15″ 18″, 20″, 24″ (16 oz. or 20 oz.) and 36″ coil (16 oz.). 24 oz. and 32 oz. are available in 3′ x 10′ sheets. Our typical stock is 1/8 to 1/4 hard copper, supplied by Aurubis, Hussey and Revere.
We also stock 1″ x 3/16″ x 12′ bar stock. Other sizes as well as 48 oz. copper are available as special order items.

Freedom Gray is commonly stocked in 3′ x 10′ sheets of 16 oz. and 20 oz. Coils are available as a special order item with a 1000 lb. minimum. Freedom gray is a Tin / Zinc coated copper from Revere Copper.

Galvalume Plus is an Acrylic coated metal, also known as Acrylume. K&M utilizes Acrylume E Plus™ supplied by US Steel.

Galvanized Steel: Offered in 26 gauge G90. 24 gauge available as special order.

Lead Coated Copper is commonly stocked in 3′ x 10′ sheets of 16 oz. and 20 oz. Special order items include 3′ x 8′ sheets and 12″, 15″, 18″, 20″ and 24″ coil stock. A minimum of 1000 lbs. is required for a coil order.

Mill finish Aluminum is commonly stocked in 4′ x 10′ sheets of 0.032″ and 0.040″.

Stainless Steel in normally available in 24 and 26 gauge 4′ x 10′ sheets, 304 alloy 2B finish. Other thickness, and finishes such as #4, #8 and 2D available as special order items.

Downloads / Color Charts

PDF – Acrylume E Plus Coated Sheet Steel (Data Sheet)
PDF – Aluminum – Alcoa (SDS)
PDF – Copper (ASTM B370 Building Spec Sheet)
PDF – Copper – Revere (Spec Sheet)
PDF – Copper – Revere (MSDS)
PDF – Freedom Gray Copper – Revere (Spec Sheet)
PDF – Lead Coated Copper (ASTM B101 02 Building Spec Sheet)
PDF – Stainless Steel – Outokumpu (Data Sheet)

PDF – Expanded Aluminum Metal Flattened
PDF – Expanded Copper Metal Flattened

Copper is the most popular metal for roof panels. It is offered in 16 oz. and 20 oz.
Freedom Gray (zinc / tin coated copper) is offered in 16 oz. and 20 oz.
Galvalume Plus is offered in 24 gauge.
Lead Coated Copper is offered in 16 oz. and 20 oz.
Zinc is offered in 0.7 mm and 0.8 mm with a raw finish.

Looking for a custom color not listed? Please EMAIL your request with all information including the metal manufacturer for a quote.

Other colors, materials and thickness may be available upon request. Colors displayed for reference only.
Please click here for a full selection of colors and materials offered.